Deff Cleave Case, as a lot of you all know, is one of, if not the very first company that introduced Apple fans to premium CNC milled cases for the iPhone 4. Their original Vapor series of aluminum bumper style cases were very popular when introduced in the Fall of last year, so popular in fact that they had a 6-8 week wait time on fulfilling orders during that time.
Having owned almost every aluminum/metal/exotic case on the market that requires screws/bolts to install the case to your iPhone, I can tell you that this little Speed Wrench Deff Cleave Draco iv Aluminum case white is a stroke of pure genius. There have been many times out and about that I, for whatever reason, have needed to pop one of my many screwed together cases off my iPhone but couldn’t, because I didn’t have a small enough screwdriver or hex key with me.
The Deff Cleave Draco iv Aluminum case white has a built in button for the sleep/wake button of the phone, and this operates flawlessly. It’s a brushed aluminum finish that matches that of the silver portion of the case. Along the right side of the case are 3 symmetrical oblong cutouts, the center of which allows for removal of the SIM tray without having to remove the entire Deff Cleave Draco iv Aluminum case white. This is another excellent thought out area of the case by Element. This allows those travelers out there to remove/swap out SIMs as needed, without having to go through the tedious process of removing the entire case.
As far as fit and finish of the case, it’s a very slim fitting case. It doesn’t add much bulk or thickness at all to the iPhone, and feels pretty good in the hand. Another area of improvement Deff Cleave Draco iv Aluminum case white has addressed is the amount of “lip” on the front and back of the phone…it’s “lay on the table” design. The original Deff Cleave Draco iv Aluminum case white had hardly no lip on front and back, and therefore you risked your phone’s glass surfaces getting scratched if laid down on a rough surface carelessly.
All in all Deff Cleave Draco iv Aluminum case white has made a very good performing aluminum hybrid case with the new Deff Cleave Draco iv Aluminum case white. Its cellular performance is quite admirable considering the Deff Cleave Draco iv Aluminum case white’s design is mostly aluminum, with only a small portion of polymer material. Typically a case made from all/mostly aluminum will have a big impact on reception. Not so here. The GPS issue I’m on the fence about…I had one case that worked flawlessly, so I know that the case can perform well here. On the other hand, I had a replacement case that had intermittent GPS issues that have also been reported by other owners.
The amazing contours and curve lines of "Cleave" not only showing it as a masterpiece of craftsmanship but also engineering design for absorbing impact and distribute the energy around the frame of the bumper to protect your iPhone 4s. Similar as in the high-tech field of aerospace and automotive design which is different from an ordinary CNC process, DRACO IV uses the most sophisticated five-axis CNC machining technology to improve manufacturing capability and repeatability.
Deff Cleave Draco iv Aluminum case for iPhone 4s feature:
With the highest quality standard in mind, DRACO design exclusively uses industrial grade aluminum to design and build Deff Cleave Draco iv Aluminum case for iPhone 4s. Widely used for construction of aircraft structures and automotive parts, the aluminum (6063 grade) has ultimate tensile strength that will withstand any tough impact. With toughness and ultra lightweight, making it the perfect candidate for protective phone bumper to keep your iphone 4s from any accidents.
Aluminum Case for iPhone 4s
Unique 3D Curves Design
Industrial Grade Aluminum (6063 Grade)
3D Curve CNC Machine Process
Compatible with Apple iPhone 4s, iphone 4
Showing posts with label Deff Cleave Draco iv Aluminum case. Show all posts
Showing posts with label Deff Cleave Draco iv Aluminum case. Show all posts
Thursday, December 29, 2011
Friday, July 22, 2011
Aluminum case Deff Cleave Draco iv review
Without a doubt aluminum cases have become very popular in the iPhone 4 accessory market such as the Element Vapor Pro, Trork Aluminium iphone 4 case and the Arachnophobia Durable Aluminium Case.While Draco Design has created a aluminum bumper case like no other. The case is called the Draco IV and it has smooth curves and lines which is a first for aluminum cases I have seen. As everyone probably knows by know most full aluminum designed cases are plagued with reception, GPS, and data problems. I will get into all the details in the review. The packaging is well designed and very professional, it comes with the case the Allen wrench and two extra screws.
This Deff Cleave Draco case attaches to the phone in a completely different way then other aluminum cases, it only uses two screws that screw in the back of the case, there is almost a male/female fitting that go together and the screw tightens them together for a secure fit. The aluminum around the screw holes is very thin so I would be careful installing the screws and a drop to that corner could very well cause the aluminum to crack in that spot. On each side of the case there is a logo, on one side is a cool small logo that says draco IV and on the other side it says inspired by Deff Japan which I dont really like but its ok. Overall I love the design and look of the case, the finish is great along with the covered buttons give the case a great look.
The protection the Deff Cleave Draco case gives you is minimal like most bumper style cases. There is little to no lay on table design on the back of the phone and the amount that is on the front is very minimal also. I would recommend using front and back screen shields or skins. Although there isn't really any lay on table protection it gives the bumper a nice slim design which I like.
The Deff Cleave Draco case has a small hole cut out on the bottom to hook a lanyard string to which I like, I would hardly ever use it but sometimes I like to tether my phone to my backpack when hiking or mt biking. I also like the sim cutout on the side, not many people use this but if you do it is way better then unscrewing the whole case to get to the simcard.
The most important part of a aluminum case review!!!! does it effect the reception? Well unfortunately I hate to report that yes it does. Here are the test results.I am in a very low reception area and I have a micro cell, the reading were slightly different then being on a normal cell tower.
The best price to buy it? It must be case2case.net, only $64.5 free shipping, if so, why spend more?
This Deff Cleave Draco case attaches to the phone in a completely different way then other aluminum cases, it only uses two screws that screw in the back of the case, there is almost a male/female fitting that go together and the screw tightens them together for a secure fit. The aluminum around the screw holes is very thin so I would be careful installing the screws and a drop to that corner could very well cause the aluminum to crack in that spot. On each side of the case there is a logo, on one side is a cool small logo that says draco IV and on the other side it says inspired by Deff Japan which I dont really like but its ok. Overall I love the design and look of the case, the finish is great along with the covered buttons give the case a great look.
The protection the Deff Cleave Draco case gives you is minimal like most bumper style cases. There is little to no lay on table design on the back of the phone and the amount that is on the front is very minimal also. I would recommend using front and back screen shields or skins. Although there isn't really any lay on table protection it gives the bumper a nice slim design which I like.
The Deff Cleave Draco case has a small hole cut out on the bottom to hook a lanyard string to which I like, I would hardly ever use it but sometimes I like to tether my phone to my backpack when hiking or mt biking. I also like the sim cutout on the side, not many people use this but if you do it is way better then unscrewing the whole case to get to the simcard.
The most important part of a aluminum case review!!!! does it effect the reception? Well unfortunately I hate to report that yes it does. Here are the test results.I am in a very low reception area and I have a micro cell, the reading were slightly different then being on a normal cell tower.
The best price to buy it? It must be case2case.net, only $64.5 free shipping, if so, why spend more?
Thursday, July 14, 2011
The most protective case Deff Cleave Draco iv Aluminum case for iPhone 4
The amazing contours and curve lines of "DRACO IV" not only showing it as a masterpiece of craftsmanship but also engineering design for absorbing impact and distribute the energy around the frame of the bumper to protect your iPhone4.
Similar as in the high-tech field of aerospace and automotive design which is different from an ordinary CNC process, DRACO IV uses the most sophisticated five-axis CNC machining technology to improve manufacturing capability and repeatability.
Deff Cleave Draco iv Aluminum case for iPhone 4 feature:
With the highest quality standard in mind, DRACOdesign exclusively uses industrial grade aluminum to design and build DRACO IV. Widely used for construction of aircraft structures and automotive parts, the aluminum (6063 grade) has ultimate tensile strength that will withstand any tough impact. With toughness and ultra lightweight, making it the perfect candidate for protective phone bumper to keep your phone from any accidents.
Aluminum Case for iPhone4 (AT&T)
Unique 3D Curves Design
Industrial Grade Aluminum (6063 Grade)
3D Curve CNC Machine Process
Compatible with Apple iPhone 4 (AT&T)
case2case.net is a market that is growing at a phenomenal rate. The industry is ever evolving and the Apple produces are nothing but the best. Because case2case.net believes that you deserve nothing but the highest quality iphone cases and accessories to use with your Apple device. we will always strive to bring you the latest and most innovative products that the market has to offer.
Similar as in the high-tech field of aerospace and automotive design which is different from an ordinary CNC process, DRACO IV uses the most sophisticated five-axis CNC machining technology to improve manufacturing capability and repeatability.
Deff Cleave Draco iv Aluminum case for iPhone 4 feature:
With the highest quality standard in mind, DRACOdesign exclusively uses industrial grade aluminum to design and build DRACO IV. Widely used for construction of aircraft structures and automotive parts, the aluminum (6063 grade) has ultimate tensile strength that will withstand any tough impact. With toughness and ultra lightweight, making it the perfect candidate for protective phone bumper to keep your phone from any accidents.
Aluminum Case for iPhone4 (AT&T)
Unique 3D Curves Design
Industrial Grade Aluminum (6063 Grade)
3D Curve CNC Machine Process
Compatible with Apple iPhone 4 (AT&T)
case2case.net is a market that is growing at a phenomenal rate. The industry is ever evolving and the Apple produces are nothing but the best. Because case2case.net believes that you deserve nothing but the highest quality iphone cases and accessories to use with your Apple device. we will always strive to bring you the latest and most innovative products that the market has to offer.
Subscribe to:
Posts (Atom)